TRIDENT® A Carbon Zero Product
Microporous Boot Covers

Type 5/6 CAT III


Category 3 Protection
Protection Against Hazardous Solid Particulates - EN ISO 13982-1:2004 +A1:2010
EN ISO 13982-1:04 + A1:10 Type 5
Splash Protection - EN 13034:2005 +A1:2010
EN 13034:05 + A1:09 Type 6
Electrostatic Properties - EN 1149-5:2008
EN 1149-5:18
Biological Protection - EN 14126:2003 +AC:2004
EN 14126:03 + AC:04
Radioactive Protection - EN 1073-2:2002 Class 2
EN 1073-2:02 CLASS 2




One size fits most


100 pairs per carton

Protection Against Hazardous Solid Particulates
Type 5 Particulate Protection

EN ISO 13982-1:2004 + A1:2010
Protective clothing for use against solid particulates. Performance requirements for chemical protective clothing providing protection to the full body against airborne solid particulates.

Splash Protection
Type 6 Splash Protection

EN 13034:2005 + A1:2009
Protective clothing against liquid chemicals. Performance requirements for chemical protective clothing offering limited protective performance against liquid chemicals.

Electrostatic Properties
Electrostatic Properties

EN 1149-5:2018
Performance requirements for protective clothing with anti static properties: Surface resistivity (<2.5 x 109 ohm). Pieces of clothing are treated in order to be statically conductive on the inside.

Biological Protection

EN 14126:2003 + AC:2004
Protective clothing. Performance requirements and test method for protective clothing against infective agents.

Radioactive Protection
Radioactive Protection

EN 1073-2:2002 Class 2
Protective clothing against radioactive contamination. Requirements and test methods for non-ventilated protective clothing against particulate radioactive contamination.


Trident 2 layer hybrid substrate technology.

Areas of Use*

These boot covers are designed for protection against hazardous substances and contamination of both product and personnel. They are typically used, dependent upon the severity of the toxicity and the conditions, for protection against airborne particles and limited non-toxic splash and spray.

*The end user is responsible for determining the suitability of this product for use in their specific conditions and applications. Sample trialling is recommended and welcomed.

WARNING!: These boot covers are inflammable and melts at approx 135˚C

© Copyright 2021 Industree Group Pty Ltd. All Rights Reserved.    |    Privacy Policy    |    Terms and Conditions A Carbon Zero Company