TRIDENT® A Carbon Zero Product
Microporous HST™ Coveralls

Type 5/6 CAT III

Trident Mircoporous Coverall White

Standards


Category 3 Protection
CATEGORY 3 PROTECTION LEVEL
Protection Against Hazardous Solid Particulates - EN ISO 13982-1:2004 +A1:2010
EN ISO 13982-1:04 + A1:10 Type 5
BMP: 767285
Splash Protection - EN 13034:2005 +A1:2010
EN 13034:05 + A1:09 Type 6
BMP: 767285
Electrostatic Properties - EN 1149-5:2008
EN 1149-5:18
BMP: 767286
Biological Protection - EN 14126:2003 +AC:2004
EN 14126:03 + AC:04
BMP: 770557
Radioactive Protection - EN 1073-2:2002 Class 2
EN 1073-2:02 CLASS 2
BMP: 767286
EN ISO 13688:13

Colour


White
DMP16
White Reflective
DMP16T
Orange Reflective
DMPHVR16

Size


S – 4XL (5XL – 6XL Available on Request)Size Chart

Packaging


1 per poly bag
50 per carton
  • Trident Mircoporous Coverall White
  • Trident Mircoporous Coverall White Reflective
  • Trident Mircoporous Coverall Orange Reflective

Protection Against Hazardous Solid Particulates
Type 5 Particulate Protection

EN ISO 13982-1:2004 + A1:2010
Protective clothing for use against solid particulates. Performance requirements for chemical protective clothing providing protection to the full body against airborne solid particulates.

Splash Protection
Type 6 Splash Protection

EN 13034:2005 + A1:2009
Protective clothing against liquid chemicals. Performance requirements for chemical protective clothing offering limited protective performance against liquid chemicals.

Electrostatic Properties
Electrostatic Properties

EN 1149-5:2018
Performance requirements for protective clothing with anti static properties: Surface resistivity (<2.5 x 109 ohm). Pieces of clothing are treated in order to be statically conductive on the inside.

BIOLOGICAL PROTECTION
Biological Protection

EN 14126:2003 + AC:2004
Protective clothing. Performance requirements and test method for protective clothing against infective agents.

Radioactive Protection
Radioactive Protection

EN 1073-2:2002 Class 2
Protective clothing against radioactive contamination. Requirements and test methods for non-ventilated protective clothing against particulate radioactive contamination.

Water Resistant
Water Resistant

Highly breathable and water resistant.

elastic
Elasticised

Elasticised ankles, cuff, hood and waist.

Tear Resistant
Tear Resistant

Optimum strength and tear resistance.

3 LAYER
3 LAYER TRI LAMINATE

Trident 3 layer substrate matrix allows for optimum breathability and comfort while providing class leading protection and performance levels.

2 WAY Zip
2 way zipper

For easy access and convenience.

STORM FLAP WITH A TAPE SEAL
Storm flap with a tape seal

Covers and seals over the zipper to ensure full protection and compliance to material standards.

Reflective tape
Reflective Tape

Increased visibility and safety.
Feature of the DMP16T and DMPHVR16 coveralls only.

Hi Vis
Hi Vis

Hi vis orange colour increases visibility and safety.
Feature of the DMPHVR16 coverall only.

Size Chart


Coverall Size Chart

Sizes according to EN340. Larger sizes are available by special order.

Areas of Use*


These coveralls are designed for protection against hazardous substances and contamination of both product and personnel. They are typically used, dependent upon the severity of the toxicity and the conditions, for protection against airborne particles and limited non-toxic splash and spray.

*The end user is responsible for determining the suitability of this product for use in their specific conditions and applications. Sample trialling is recommended and welcomed.

WARNING!: This coverall is inflammable and melts at approx 135˚C

© Copyright 2021 Industree Group Pty Ltd. All Rights Reserved.    |    Privacy Policy    |    Terms and Conditions A Carbon Zero Company